Stanley laser croix 360° STHT77504-1 laser level
Image published by Stanley.
Laser levels

Stanley laser croix 360° STHT77504-1

7/10The only 360° horizontal in the panel

Affiliate link: we earn a commission if you buy through it, at no extra cost to you. It never affects our scores. How we make money

$147.55

See on Amazon

Price retrieved automatically from Amazon every day. It may have changed since.

A horizontal line that runs right round the room plus a vertical, in red, for a stated 20 m range and ± 4 mm at 10 m. It is the only unit in the comparison that marks a level on four walls without being turned, with four AA batteries supplied.

What its figures are worth

  • Stated accuracy at 10 m 40 %4 mm · 8/10
  • Price per metre of range 25 %7.4 USD per m · 8/10
  • Stated visible range 20 %20 m · 6/10
  • IP rating, read as a number 15 %50 · 4/10

Every criterion in the scale could be calculated. Weighting: Stated accuracy at 10 m 40 %, Price per metre of range 25 %, Stated visible range 20 %, IP rating, read as a number 15 %.

Choose it if

  • A suspended ceiling, skirting or wall tiling across a whole room.
  • A stated accuracy slightly better than the other Stanleys, ± 4 mm.

Skip it if

  • Red beam and IP50: indoors only.
  • No tripod thread published on the page.

Check the price on Amazon

Published specifications

Retrieved from stanleytools.co.uk. Quoted from the page: « Page Stanley (Royaume-Uni) : "RED BEAM LASER: With a visible working range of up to 20M / IP RATED TO IP50: Protects against dust / SELF LEVELING: To +/- 4° / RUNS ON: 4 x AA batteries (supplied)" ; tableau : "Working Range [mm] 20 / IP Rating IP50 / "Laser Accuracy ± 4mm @ 10 m / Leveling Time ≤ 5sec / Line Diagram 1 x 360° + 1 Vertical / Product Weight [Kg] 0.71". »
SpecificationStated value
Stated accuracy, expressed at 10 m4 mm
Stated visible range20 m
Lines projected1 horizontal at 360° and 1 vertical
Beam colourred
Self-levelling range± 4°
Levelling time5 s or less
IP ratingIP50
Laser classnot published on the page we consulted
Power4 AA alkaline batteries, supplied
Stated runtimenot published on the page we consulted
Weight0.71 kg
Tripod threadnot published on the page we consulted

Before switching on

  • Never look into the beam or point it at anyone, even at class 2: the blink reflex protects the eye for less than a quarter of a second.
  • Lock the pendulum before packing the unit away. A compensator rattling in a case is the first cause of a laser going out of calibration.
  • Check the unit on site: mark a line at 5 m, turn the unit through 180°, mark the same line again; the gap between the two marks must stay within the published tolerance.
  • Outdoors, plan on the receiver: even a green beam vanishes in sunlight, whatever the stated range.

Frequently asked questions

Where does this machine's score come from?

It is calculated, not awarded. Five measurable criteria are weighted, and each value is mapped onto a scale relative to the other machines in the comparison. For this machine, 100% of the scale could be applied: criteria the maker does not publish drop out rather than being replaced by an estimate.

Green beam or red?

Green shows up better in a bright room and from further away, which is what every maker states as range. It changes nothing about accuracy: in this panel the red and green Stanley Cross90 publish the same ± 5 mm at 10 m. Green also drains batteries faster: Laserliner states 6 h in green against 20 h in red.

How accurate does it need to be for a stud wall or tiling?

A stated ± 3 mm at 10 m covers a whole room without the error showing on the skirting. The ± 5 or ± 6 mm of DIY lasers is fine for a border, a shelf or a small wall tiling, not for an 8 m track.